uLektz Skills

Learning Path

Non-Linear: Random Order

About the Course

Course Description

This course provides students with concepts of Review of Low frequency parameters - Impedance, Admittance, Hybrid and ABCD parameters, High Frequency parameters, Transmission matrix, Stability considerations and Broadband, High power and Multistage Amplifiers

Objectives

1.Will familiarize about IMPATT diode oscillator and amplifier

2.Will demonstrate Impedance matching devices - Tuning screw, Stub and quarter wave transformers

3.Will develop knowledge in Theory and application of Two cavity Klystron Amplifier

Prerequisite

There is no particular prerequisite to learn RF and Microwave Engineering, you will be able to do very well, if you have these basic skills:

1. Basic Analytics skills

2. Good Understanding Knowledge

3. Good Communication skills

Course Study Materials

Module 1: Two Port Network Theory

1.1 Review of Low frequency parameters - Impedance, Admittance, Hybrid and ABCD parameters
1.2 High Frequency parameters
1.3 Transmission matrix
Two Port Network Theory 10 Questions

Module 2: RF Amplifiers and Matching Networks

2.1 Characteristics of Amplifiers
2.2 Stability considerations
2.3 Noise Figure
2.4 Broadband, High power and Multistage Amplifiers
2.5 Frequency response and quality factor
RF Amplifiers and Matching Networks 10 Questions

Module 3: Passive and Active Microwave Devices

3.1 Terminations
3.2 Directional couplers
3.3 Power dividers
3.4 Impedance matching devices - Tuning screw, Stub and quarter wave transformers
3.5 PIN diode switch
3.6 IMPATT diode oscillator and amplifie
3.7 Varactor diode
Passive and Active Microwave Devices 10 Questions

Module 4: Microwave Generation

4.1 Review of conventional vacuum Triodes, Tetrodes and Pentodes
4.2 Theory and application of Two cavity Klystron Amplifier
4.3 Reflex Klystron oscillator
4.4 Traveling wave tube amplifier
Microwave Generation 10 Questions

Module 5: Microwave Measurements

5.1 Measuring Instruments:Principle of operation and Application of VSWR meter, Power meter
5.2 Measurement of Impedance, Frequency, Power, VSWR, Q-factor, Dielectric constant, Scattering coefficients, Attenuation,S-parameter
Microwave Measurements 10 Questions

Final Assessment

Final Assessment 20 Questions

The certificate issued for the Course will have

Student's Name
Photograph
Course Title
Certificate Number
Date of Course Completion
Name(s) and Logo(s) of the Certifying Bodies

Only the e-certificate will be made available. No Hard copies. The certificates issued by The Academic Council of uLektz. can be e-verifiable at www.ulektzskills.com/verify.

Students will be assessed both at the end of each module and at the end of the Course.
Students scoring a minimum of 50% in the assessments are considered for Certifications